+91 9860897191/ +91 2029705190 atspoint@outlook.com / kanifnathenterprises@hotmail.com

Automotive UNECE Approval

Homologations for vehicles, components and systems

ATS Point Kanifnath Enterprises as the designated Technical Service and as Inspection Body, carries out inspections on the test activities carried out directly at the manufacturer’s or third-party laboratory installations, for the release of the final inspection report and the subsequent approval certificate issued by the Authority competent, that complies with UN ECE, for the following types of approvals:

  • Vehicles cat. M, N, O Approval and control of the production of motor vehicles and their trailers, as well as of the systems, components and separate technical units intended for these vehicles, according to the reference framework regulations (UN ECE): Directive 2007/46 / EC (European Commission) and EU (European Union) Regulation 2018 / 858 and subsequent amendments and additions.
  • Vehicles cat. L Approval and production control of two or three-wheel vehicles and quadricycles, according to EU  (European Union) Regulation no. 168/2013 and on delegated acts.
  • Vehicles cat. T, C, R, S Approval and control of the production of agricultural and forestry vehicles according to EU Regulation no. 167/2013 and its delegated acts.
  • NRMM non-road engines Approval and production control of non-road engines (Non-Road Mobile Machinery).
  • Individual homologations Homologation of vehicles in single copy, according to the reference standards (UN ECE): Art. 24 Directive 2007/46 / CE and Chapter IX of the EU (European Union)  Regulation 2018/858.
  • Homologation of components, systems and independent technical units Homologation and control of the production of components, systems and independent technical units, according to CE (.Conformitè Europëenne) / UE and ECE (ECE automotive standards & regulations (of the Economic Commission for Europe)

Initial evaluation and production process IA 

ATS Point Kanifnath Enterprises carries out IA Initial Assessment inspections to verify that there are provisions and procedures that are considered suitable to guarantee the effective control of conformity to the approved type of components, systems, separate technical units or vehicles in production, aimed at the application for approval

Periodic evaluation and control of the CoP production process

ATS Point Kanifnath Enterprises carries out CoP periodic inspections, to ensure and agree with the manufacturer, that the provisions and procedures are adequate and the control plans are documented, so that the tests and checks necessary to verify the continuity of compliance are carried out at set intervals to the “Product Conformity” approved type.

Periodic inspection of the CoP product

ATS Point Kanifnath Enterprises following the approval issued by the Authority, can verify at any time the conformity control methods applied at the individual production plants. ATS verifies the constant effectiveness of the procedure established in the Initial Evaluation and in the Periodic Control. The frequency of the verifications allows to guarantee that the controls carried out in compliance with the Initial Evaluation and the Evaluations and Periodic Checks, are examined for a period compatible with the climate of trust. established by the competent Authority.

ATS Point Kanifnath Enterprises inspectors will be able to take samples randomly to be subjected to laboratory tests or tests provided for in the reference standard of the approval obtained by the manufacturer. If the results are not considered satisfactory, they will be communicated to the Authority for the subsequent withdrawal of the approval.

UN ECE Inspection


ATS Point Kanifnath Enterprises, the Technical Service currently designated by the Homologation Authority of the Republic of San Marino, is able to carry out inspections on tests according to the main regulations applied in the Automotive sector through the vast international network of inspectors.

ATS Point Kanifnath Enterprises, with the experience of its inspectors, is able to carry out inspections, with the consequent release of the Inspection Report, as regards all the ECE Regulations. It will therefore be up to the Authority to complete the process, with the issue of the Certificate of Approval.

ATS Point Kanifnath Enterprises has several laboratories, internal or third parties, recognized by the Technical Service itself, for the purpose of carrying out inspections on a global scale.

Other Standards

ATS Point Kanifnath Enterprises is also able to carry out inspections according to various International Standards, in compliance with the ISO/IEC 17020: 2012 standard, such as:

  • ARAI – Automotive Research Association of India – India
  • ADR – Australian Design Rules – Australia
  • GB standards for China (CCC Mark)
  • GOST for Russia
  • TRIAS for japan
  • VSCC- Vehicle Safety Certification Center – Taiwan, VSTD for Taiwan.
  • TISI – Thai Industrial Standards Institute -Thailand
  • INMETRO – National Institute of Metrology, Standardization and Industrial Quality – Brazil

GB standards for China (CCC Mark)

The China Compulsory Certification (CCC)  audit is similar to European CE certification system – but has its own requirements for the Chinese market. Automotive vehicle manufacturers and suppliers can only sell their products in China, after the CCC certification has been obtained.
Our experts perform factory audit inspection to ensure that your facilities meet the CCC requirements.

European Conformity of Production

The Conformity of Production (COP) is applicable to entire Quality Management System (QMS) and ensures production of series of products with a constant quality in conformity with the specification defined in the type approval documentation.


INMETRO is Brazil’s National Institute of Metrology, Quality and Technology. INMETRO regulations govern the import of automotive / vehicle products in Brazil by ensuring a minimum standard of quality and safety.
Our specialist’s perform factory audit inspections to ensure that your facilities meet the INMETRO requirements.

ARAI Audits

ARAI  is India’s premier Automotive R&D, testing and certification organization. We as a certification agency provide ARAI consultancy and help you with inspection and certification services for export homologation. Our auditors work with you and ARAI and offer testing and homologation solutions to Indian and International automotive industry, thus simplifying international homologation process.

Our services help in exports of vehicles and vehicle parts by ensuring all the aspects of testing and certification are as per International standards like EEC / ECE  / EU. We offer comprehensive certification and homologation services for all automotive vehicles, systems, and components. We also assists the vehicle manufacturers for export homologation activities.
WhatsApp chat